Part number
Crane
Your crane
Nothing matches that. Try the model number on its own, for example 1300 or 16000, or an OEM part number.
Crane not on our site? Send us the crane and we will quote the rope.Lengths and part numbers are the ropes a rope maker stocks for these cranes (Pfeifer tower crane rope list, 2018). Hoist rope length depends on hook height and reeving, so you can also enter your own length.
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hoist rope | 16 mm | 200 m (656 ft) | quote to length | Estimate US$15 to 21 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Trolley rope | 9 mm | 71 m (233 ft) | quote to length | Priced on your quote | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
Estimates are for the rope assembly, including the end fittings named in the part number (poured or pressed buttons, spelter sockets or swaged fittings), from current rope maker list prices. Each range runs from the most economical rope that meets spec to a higher-quality rope. Freight is free in Canada and the lower 48 states (hotshot freight is extra). Tariffs and taxes are extra and shown on their own line of your quote. Your quote confirms the price.
Most crane winches can take several ropes that meet the crane maker’s specification. Crane makers fit different ropes depending on lifting height, configuration, region and rope maker, and we also offer aftermarket ropes that meet or exceed the OEM spec. The low end of each range is the most economical rope that meets spec; the high end is a higher-quality rope.
On day one they perform the same. Over time, a higher-quality rope keeps its rotation resistance and stability until it wears out normally, with crown wire breaks. A cheaper rope tends to twist up without obvious signs of wear, and is more likely to jump sheaves later in life. Tell us how you run the crane and we will recommend the rope that fits your work and your budget. How to choose a crane rope.
Tariffs on imported steel rope change often and depend on where the rope is made and where it ships. They are not in these estimates: your quote shows them on their own line, so you can see the rope price matches. Freight is free in Canada and the lower 48 states; hotshot freight is extra.
Older Liebherr EC tower cranes take 16 mm hoist rope (91 EC, 110 EC-B, 140 EC-H) or 18 mm (112 EC-H and 112 EC-B). The lengths and Liebherr part numbers below are the ropes stocked for these cranes; the hoist length on your crane depends on hook height.
Reviewed by Dean McDonald, October 2026
Where the standard that applies to your crane type and where it ships (ASME B30.30, CSA Z150, CSA Z248, API or ISO 4309) requires proof testing of the assembly, the proof test is included in the price. If you need other testing or certificates, tell us when you ask for a quote.
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hoist rope | 18 mm | 191 m (627 ft), 112 EC-H 195 m (640 ft) | quote to length | Estimate US$16 to 22 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Trolley rope | 8 mm | 112 m (367 ft) | quote to length | Priced on your quote | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
The rope list gives the same part number for both hoist rope lengths; we confirm the length with you.
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hoist rope | 16 mm | 175 m (574 ft) 191 m (627 ft) | quote to length | Estimate US$15 to 21 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hoist rope | 16 mm | 178 m (584 ft) | quote to length | Estimate US$15 to 21 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
More Liebherr tower cranes: Liebherr 200 HC, Liebherr 280 HC-L 12/24, Liebherr 357 HC-L, Liebherr 357 HC-L 18/32, Liebherr 550 EC-H 20.
What does this damage look like? See our wire rope damage photo library from field inspections.