Part number
Crane
Your crane
Nothing matches that. Try the model number on its own, for example 1300 or 16000, or an OEM part number.
Crane not on our site? Send us the crane and we will quote the rope.Hoist rope length depends on hook height and reeving. Pick the factory length or enter the length for your set-up.
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hoist rope | 23 mm | 532 m (1,745 ft), factory fit | quote to length | Estimate US$22 to 31 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
Estimates are for the rope assembly, including the end fittings named in the part number (poured or pressed buttons, spelter sockets or swaged fittings), from current rope maker list prices. Each range runs from the most economical rope that meets spec to a higher-quality rope. Freight is free in Canada and the lower 48 states (hotshot freight is extra). Tariffs and taxes are extra and shown on their own line of your quote. Your quote confirms the price.
Most crane winches can take several ropes that meet the crane maker’s specification. Crane makers fit different ropes depending on lifting height, configuration, region and rope maker, and we also offer aftermarket ropes that meet or exceed the OEM spec. The low end of each range is the most economical rope that meets spec; the high end is a higher-quality rope.
On day one they perform the same. Over time, a higher-quality rope keeps its rotation resistance and stability until it wears out normally, with crown wire breaks. A cheaper rope tends to twist up without obvious signs of wear, and is more likely to jump sheaves later in life. Tell us how you run the crane and we will recommend the rope that fits your work and your budget. How to choose a crane rope.
Tariffs on imported steel rope change often and depend on where the rope is made and where it ships. They are not in these estimates: your quote shows them on their own line, so you can see the rope price matches. Freight is free in Canada and the lower 48 states; hotshot freight is extra.
The Terex CTT 721 takes 23 mm hoist rope and the SK 415-20 22 mm. The lengths below are the ropes fitted at the factory; hoist length on your crane depends on hook height.
Reviewed by Dean McDonald, October 2026
Where the standard that applies to your crane type and where it ships (ASME B30.30, CSA Z150, CSA Z248, API or ISO 4309) requires proof testing of the assembly, the proof test is included in the price. If you need other testing or certificates, tell us when you ask for a quote.
532 m is the hoist rope supplied to Comedil for this crane (rope maker's certificate).
| Winch | Diameter | Length | OEM part no. | ||
|---|---|---|---|---|---|
| Hook rope (hoist) | 22 mm | 440 m (1,444 ft), factory fit | quote to length | Estimate US$20 to 28 per m with end fittings, before tariffs and taxes | |
Lengths vary on this machine. Pick a recorded length or enter the length you need. | |||||
| Don't see your part number, or the rope spec doesn't match? This machine may come with rope lengths or rope specs that aren't shown here. We can still help: fill out a rope request or send us your spec sheet. | |||||
From the Comedil certificate pack for this crane. The pack also lists 12 mm and 8 mm ropes whose duty is not stated; send us your crane number and we will match them.
More Terex tower cranes: Terex SK 575.
What does this damage look like? See our wire rope damage photo library from field inspections.